Deep Energy Saving Technology in Air Compression System

doi:10.12096/j.2096-4528.pgt.2018.012

Abstract

Abstract:

Compressed air system is one of the most important systems in traditional industries. As a main energy consumer, it has important practical significance to save energy from three major links of production, transportation and application. This paper analyzed the main energy consumption of compressed air from production and transportation to the utilization, and a series of improvement measures on energy saving were put forward and analyzed based on the actual working process of compressed air system. The analysis shows that the deep energy conservation transformation is a complex work which needs to be matched with each link, the energy consumption will be greatly reduced when traditional energy saving measures assisted by new frequency conversion technology, aircompressor station intelligent monitoring system and heat recovery technology. This paper can provide reference for energy saving reconstruction of air compressor system in factories and enterprises.

Key words: compressed air, energy consumption, energy-saving and cost-reducing

Ye LIU,Gaosheng WEI,Wenjiang YOU,Xiaoze DU. Deep Energy Saving Technology in Air Compression System[J]. Power Generation Technology, 2018, 39(1): 70-76.

References

1	白学利, 安惠勇, 李利波. 空气压缩机能耗检测与分析[J]. 华电技术, 2012, 34 (4): 70- 72, 85.
2	蔡茂林. 压缩空气系统的能耗现状及节能潜力[J]. 中国设备工程, 2009, (7): 42- 44.
3	Mckane A. Improving energy efficiency of compressed air system based on system audit[R]. The fifth global motor system energy efficiency forum, 2008.
4	Mark A . Koski CEM and CDSM and CVA.Compressed air energy audit "The real story"[J]. Energy Engineering, 2002, 99 (3): 59- 70.
5	Dalgleish A Z , Grobler L J . Energy management opportunities on a compressed air system in a packaging facility[J]. Energy Engineering, 2006, 103 (4): 42- 52.
6	Cai M , Kawashima K , Kagawa T . Power assessment of flowing compressed air[J]. Journal of Fluids Engineering, 2006, 128 (2): 402- 405.
7	张谦, 赵远扬, 王乐, 等. 压缩空气系统节能技术的研究进展[J]. 流体机械, 2016, 44 (3): 38- 40, 17.
8	秦宏波, 胡寿根. 工业压缩空气系统优化潜力研究[J]. 流体机械, 2010, 38 (2): 49- 52.
9	唐任远, 安忠良, 赫荣富. 高效永磁电动机的现状与发展[J]. 电气技术, 2008, (9): 1- 6.
10	杜辉, 施飞航, 谭晓东, 等. 永磁同步电机变频调速节能系统设计与效益分析[J]. 节能, 2015, 34 (12): 66- 69.
11	An Z, Chen L, Tang R. Study on premium-efficiency NdFeB PM synchronous motor[C]//International Conference on Electrical Machines and Systems, IEEE, 2003(1): 49-51.
12	王亚兵. 稀土永磁电机与异步电机节能效果对比[J]. 电机技术, 2014, 5, 52- 53.
13	张缓缓, 鲍洋洋, 刘玉勇, 等. 吸气温度对喷油螺杆空压机能效检测的影响研究[J]. 通用机械, 2016, (5): 76- 78.
14	秦莉, 颜苏芊, 刘宁, 等. 吸气参数对无油螺杆空压机运行能耗的影响[J]. 棉纺织技术, 2015, 43 (11): 38- 42.
15	魏新利, 汤本凯. 降低压缩机吸气温度对排气量和功耗的影响分析[J]. 化肥工业, 2012, 39 (3): 29- 32.
16	赵荣义, 范存养, 薛殿华, 等. 空气调节[M]. 北京: 中国建筑工业出版社.
17	高振良. 空气压缩机站房的节能[J]. 节能技术, 1998, (5): 46.
18	孙立新, 姚晨晨, 马志鸿. 南屯电厂压缩空气系统改造方案探索[J]. 现代制造, 2011, (18): 87- 87.
19	王志云. 离心式和无油螺杆式空压机的性能比较[J]. 压缩机技术, 2010, (2): 17- 20.
20	孙晓明, 彭恒, 林子良. 动力用空气压缩机能源效率探讨[J]. 流体机械, 2013, (11): 48- 51.
21	杨清强. 螺杆空压机两级压缩节能技术分析[J]. 深冷技术, 2009, (5): 14- 16.
22	苟新超. 空气压缩机节能技术研究与应用[J]. 节能, 2015, (10): 65- 69.
23	李国庆. 压缩空气站房的空压机设备合理选型[J]. 科技资讯, 2007, (21): 50- 50.
24	闫光启, 杨勇伟, 王立, 等. 空压机变频改造节能效果分析[J]. 水泥技术, 2013, (1): 96- 98.
25	李强. 螺杆式空压机变频控制与余热回收改造[J]. 现代矿业, 2016, (1): 216- 217.
26	许祥. 空压机变频节电技术与实际效果测试分析[J]. 宁波节能, 2013, (6): 40- 42.
27	梁艳娟. 空压机变频改造节能技术的研究与应用[J]. 制造业自动化, 2011, 33 (13): 153- 156.
28	陈鹏高, 高宝华, 任廷荣. 空压机的节能改造[J]. 压缩机技术, 2013, (4): 99- 104.
29	董士刚, 郭森河. 漳山电厂空压机变频改造[J]. 能源与节能, 2013, (12): 173- 174.
30	赵岩. 压缩机节能技术的研究[J]. 科技创新与应用, 2016, (36): 126- 126.
31	Kameya H , Yamasaki M , Ajima T , et al. Coupled system simulator for air screw compressors and their drive systems[J]. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering,
32	陈建华,蔡云泽,张卫东.空压机群控压力智能切换控制及应用[C]//中国计量协会冶金分会2016年会论文集, 2016.
33	张业明, 蔡茂林. 面向压缩机群控制的新型节能智能控制器的研究[J]. 液压气动与密封, 2008, 28 (5): 14- 18.
34	谭振云. 火力发电厂压缩空气系统设计优化及比较[J]. 广西电力, 2009, 32 (5): 100- 103.
35	孙铁源, 蔡茂林. 压缩空气系统的运行现状与节能改造[J]. 机床与液压, 2010, 38 (13): 108- 110.
36	范亚伟, 章杰. 空压机余热利用综述[J]. 能源与节能, 2014, (4): 3- 4.
37	宁建军. 空压机余热回收系统节能技术改造[J]. 江苏船舶, 2015, 32 (5): 25- 27.
38	王近邻. 空压站余热回收系统节能设计[J]. 中国建筑金属结构, 2013, (10): 126- 128.
39	程艳.有油螺杆空压机余热回收的换热器选型及应用技术的研究[D].西安工程大学, 2016.
40	孙建辉, 倪旭光, 袁巧玲, 等. 基于Fluent的无摩擦气缸活塞结构设计仿真[J]. 机电工程, 2013, 30 (8): 933- 936.
41	王文深. 一种双级节能气缸[J]. 液压与气动, 2009, (11): 21- 22.
42	李军, 王祖温, 包钢. 气动系统节能研究简介[J]. 机床与液压, 2001, (5): 7- 8.
43	Saidur R , Rahim N A , Hasanuzzaman M . A review on compressed-air energy use and energy savings[J]. Renewable & Sustainable Energy Reviews, 2010, 14 (4): 1135- 1153.
44	Zhang J . Designing a cost-effective and reliable pipeline leak-detection system[J]. Pipes & Pipelines International, 1997, 42 (1): 20- 26.
45	谭健, 刘龙飞. 压缩空气管网系统节能改进[J]. 设备管理与维修, 2001, (7): 36.
46	石岩,蔡茂林.气动系统分压供气与局部增压技术[C]//"科德杯"全国染整节能减排新技术研讨会. 2011: 57-59.

[1]	Rongrong ZHAI, Qing WEI, Lingjie FENG, Gexun SUN. Analysis of Energy Consumption Characteristics of Carbon Capture System in Coupled Membrane Condenser [J]. Power Generation Technology, 2023, 44(5): 667-673.
[2]	Haibin YU, Yuchen ZHANG, Yangyang LIU, Zengjie LU, Jinde WENG. Optimal Dispatching Bidding Strategy of Multi-Agent Virtual Power Plant Participating in Electricity Market Under Carbon Trading Mechanism [J]. Power Generation Technology, 2023, 44(5): 634-644.
[3]	Lianpeng ZHAO, Zhenyang ZHANG, Gang AN, Shenyin YANG. Progress in Hydrogen Liquefaction Technology With Mixed Refrigerant [J]. Power Generation Technology, 2023, 44(3): 331-339.
[4]	Huan ZHANG, Li WANG, Yi YE, Xinglei ZHAO. Study on CO₂ Absorbent of DETA and TEA Mixed Amine Solution [J]. Power Generation Technology, 2022, 43(4): 609-617.
[5]	Ding WANG, Yuxuan CHEN, Hu XIAO, Yanping ZHANG. Comparative Analysis of Heat Transfer Characteristics of Conical Cavity Receivers With Different Heat Transfer Fluids [J]. Power Generation Technology, 2021, 42(6): 682-689.
[6]	Yaowang LI,Shihong MIAO,Binxin YIN,Shixu ZHANG,Songyan ZHANG. Optimal Dispatch Model for Micro Integrated Energy System Considering Multi-carrier Energy Generation Characteristic of Advanced Adiabatic Compressed Air Energy Storage [J]. Power Generation Technology, 2020, 41(1): 41-49.
[7]	Zhichao LIU,Hongbin WANG,Hao SHA,Jinshu YANG,Shengxian CAO. Status and Prospect Analysis of Wind Power Utilization Technology in China [J]. Power Generation Technology, 2019, 40(4): 389-395.
[8]	Dongsheng YANG,Daohao WANG,Bowen ZHOU,Qiyu CHEn,Zhile YANG,Guoyi XU,Mingjian CUI. Key Technologies and Application Prospects of Ubiquitous Power Internet of Things [J]. Power Generation Technology, 2019, 40(2): 107-114.
[9]	Xiankui WEN,Shihai ZHAGN,Tongtian DENG,Pan LI,Wen CHEN. A Summary of Large Capacity Power Energy Storage Peak Regulation and Frequency Adjustment Performance [J]. Power Generation Technology, 2018, 39(6): 487-492.
[10]	LIANG Jie, HUANG Keying. Research on Energy Consumption of Air Conditioning Based on Sensitivity Analysis of Household Electricity Scene [J]. Power Generation Technology, 2017, 38(6): 85-89.
[11]	WEI Hongge, ZHANG Yang, DU Zhen, ZHU Yue. Analysis of Coal-fired Unit Ultra Low Emission Retrofit's Influence on Unit's Energy Consumption Increasing and Its Energy-saving, Optimization Methods [J]. Power Generation Technology, 2017, 38(6): 14-17,33.
[12]	DENG Wan-zi. Comparative Study on the Forms of Cold and Heat Sources in an Office Project [J]. Power Generation Technology, 2017, 38(4): 92-94.
[13]	LI Yun-chao, SONG Hua-wei, MA Hong-tao, WANG Bao-yu, XUE Fu. Research on the Development of Energy Storage Technology [J]. Power Generation Technology, 2017, 38(4): 56-61.
[14]	FA Zheng-hao. River-water Temperature Analysis and Energy Consumption Analysis of the Huangpu River River-water Source Heat Pump in Cooling Season [J]. Power Generation Technology, 2017, 38(2): 88-91.