Power Generation Technology ›› 2020, Vol. 41 ›› Issue (6): 667-674.DOI: 10.12096/j.2096-4528.pgt.19079

• Energy Internet • Previous Articles     Next Articles

Sub-parts Control Parameter Fitting Method of VSC Based on RTDS

Peng XU1(), Jianbin MI2(), Xiaofei MENG3(), Huan XIE2()   

  1. 1 North China Branch of State Grid Corporation of China, Xicheng District, Beijing 100045, China
    2 Electric Power Research Institute of State Grid Jibei Electric Power Company Limited, Xicheng District, Beijing 100045, China
    3 Huarun Power(Wenzhou) Co., Ltd., Wenzhou 325000, Zhejiang Province, China
  • Received:2020-05-17 Published:2020-12-31 Online:2021-01-12
  • Supported by:
    National Key Research and Development Program of China(2016YFB0900502);Science and Technology Program of State Grid Corporation(520101180002)

Abstract:

Voltage source converter (VSC) is the main power electronic components of wind power, photovoltaic and converter stations. It's control mode and parameter setting have important influence on system operation. Based on real time digital simulator (RTDS) hardware-in-loop simulation and digital simulation, a new method of parameter fitting applied to characterize physical VSC was proposed. Taking a typical single VSC grid connected system model as an example, firstly, based on the principle of phase-locked loop (PLL), an adaptive observation coordinate system was proposed to compare and fit the step response of two simulation models. Then the fitting methods of PLL, current inner loop and DC voltage outer loop in VSC control system were introduced separately. Self-adaptive observational coordinate system was used in the process of current inner loop parameter fitting. Finally, the efficiency of the proposed method was verified by the comparative analysis of simulations.

Key words: voltage source controller (VSC), parameter fitting, self-adaptive observation coordinate system, phase-locked loop (PLL)

CLC Number: