1 |
薛晓东, 韩巍, 王晓东, 等. 适合分布式冷热电联供系统的中小型发电装置[J]. 发电技术, 2020, 41 (3): 252- 260.
|
|
XUE X D , HAN W , WANG X D , et al. Small and medium-scale power generation devices suiting for distributed combined cooling, heating and power system[J]. Power Generation Technology, 2020, 41 (3): 252- 260.
|
2 |
苏烨, 丁俊宏, 丁宁, 等. 全国燃气轮机联合循环机组热控系统典型故障分析及预控措施建议[J]. 浙江电力, 2020, 39 (8): 95- 102.
|
|
SU Y , DING J H , DING N , et al. Typical fault analysis and proposals of pre-control measures for thermal control system of national gas turbine combined cycle units[J]. Zhejiang Electric Power, 2020, 39 (8): 95- 102.
|
3 |
朱俊杰, 王晓维, 董玉亮, 等. 基于工况辨识的重型燃气轮机性能评价方法研究[J]. 智慧电力, 2020, 48 (7): 24- 29.
DOI
|
|
ZHU J J , WANG X W , DONG Y L , et al. Performance evaluation method of heavy duty gas turbine based on condition identification[J]. Smart Power, 2020, 48 (7): 24- 29.
DOI
|
4 |
翁史烈, 陈汉平. 湿空气透平循环的基础研究[M]. 上海: 上海交通大学出版社, 2008: 2- 5.
|
|
WENG S L , CHEN H P . The basic research of humid air turbine cycle[M]. Shanghai: Shanghai Jiaotong University Press, 2008: 2- 5.
|
5 |
HIGUCHI S, KOGANEZAWA T, HORIUCHI Y, et al. Test results from the advanced humid air turbine system pilot plant: part 1: overall performance[C]//Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea, and Air. Berlin, Germany, June 9-13, 2008: 691-700.
|
6 |
YAGI M , ARAKI H , TAGAWA H , et al. Progress of the 40 MW-class advanced humid air turbine tests[J]. Journal of Engineering for Gas Turbine and Power, 2013, 135 (11): 112002.
DOI
|
7 |
TRINH X T , FÉNOT M , DORIGNAC E . The Effect of nozzle geometry on local convective heat transfer to unconfined impinging air jets[J]. Experimental Thermal and Fluid Science, 2016, 70, 1- 16.
DOI
|
8 |
XING Y , SPRING S , WEIGAND B . Experimental and numerical investigation of heat transfer characteristics of inline and staggered arrays of impinging jets[J]. Journal of Heat Transfer, 2010, 132 (9): 1- 9.
|
9 |
XING Y , WEIGAND B . Experimental investigation of impingement heat transfer on a flat and dimpled plate with different crossflow schemes[J]. International Journal of Heat and Mass Transfer, 2010, 53 (19/20): 3874- 3886.
|
10 |
TASLIM M E , BETHKA D . Experimental and numerical impingement heat transfer in an airfoil leading-edge cooling channel with cross-flow[J]. Journal of Turbomachinery, 2009, 131 (1): 939- 947.
|
11 |
BU X , PENG L , LIN G , et al. Experimental study of jet impingement heat transfer on a variable-curvature concave surface in a wing leading edge[J]. International Journal of Heat and Mass Transfer, 2015, 90, 92- 101.
DOI
|
12 |
韩旭军. 涡轮叶片内部冷却结构参数化及带肋通道优化设计[D]. 哈尔滨: 哈尔滨工业大学, 2011.
|
|
HAN X J. Parametric expression of cooling structure of turbine blade and the optimization design of channels with ribs[D]. Harbin: Harbin Institute of Technology, 2011.
|
13 |
刘传凯, 丁水汀, 陶智. 旋转附加力对方通道内流动与换热的影响机理[J]. 北京航空航天大学学报, 2009, 35 (3): 276- 279.
|
|
LIU C K , DING S T , TAO Z . Effects of rotating induced forces on fluid flow and heat transfer in square channel[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35 (3): 276- 279.
|
14 |
CHANG S W , HU Y W . Endwall thermal performances of radially rotating rectangular channel with pin-fins on skewed rib lands[J]. International Journal of Heat and Mass Transfer, 2014, 69, 173- 190.
DOI
|
15 |
LIGRANI P M , OLIVEIRA M M , BLASKOVICH T . Comparison of heat transfer augmentation techniques[J]. AIAA Journal, 2003, 41 (3): 337- 362.
DOI
|
16 |
张丽, 张书华, 朱惠人, 等. 小间距梯形扰流柱通道内的流动换热数值计算[J]. 航空动力学报, 2009, 24 (1): 13- 17.
|
|
ZHANG L , ZHANG S H , ZHU H R , et al. Numerical simulation on flow and heat transfer in channel with small spacing short pin-fin arrays[J]. Journal of Aerospace Power, 2009, 24 (1): 13- 17.
|
17 |
吴江波, 王新军. 扰流肋柱在流动方向排列密度对矩形通道表面传热影响的数值研究[J]. 热科学与技术, 2010, 9 (4): 308- 311.
DOI
|
|
WU J B , WANG X J . Numerical study of effects of pin-fin array density at flow direction on heat transfer[J]. Journal of Thermal Science and Technology, 2010, 9 (4): 308- 311.
DOI
|
18 |
CLEETON J , KAVANAGH R M , PARKS G T . Blade cooling optimization in humid-air and steam-injected gas turbines[J]. Applied Thermal Engineering, 2010, 29, 3274- 3283.
|