Power Generation Technology ›› 2025, Vol. 46 ›› Issue (2): 274-283.DOI: 10.12096/j.2096-4528.pgt.24118

• Modeling, Simulation and Optimal Operation of Integrated Energy System Based on Swarm Intelligence • Previous Articles    

Gas Network Aggregate Modeling and Identification Method for Integrated Energy System Operation

Yong SUN1, Zihang GAO2, Zeyin HOU2, Dexin LI1, Yao WANG1, Haifeng ZHANG1, Shuai LU2   

  1. 1.State Grid Jilin Electric Power Company, Changchun 130021, Jilin Province, China
    2.School of Electrical Engineering, Southeast University, Nanjing 211189, Jiangsu Province, China
  • Received:2024-06-23 Revised:2024-09-12 Published:2025-04-30 Online:2025-04-23
  • Supported by:
    National Key Research & Development Program of China(2022YFB2404000)

Abstract:

Objectives Natural gas networks are important components of integrated energy systems, which can provide considerable flexibility for the operation of the integrated energy system. Developing an accurate gas network model is the foundation for the operation and control of integrated energy systems. However, existing mechanism models for gas networks show high complexity, with certain parameters being unidentifiable in practical engineering applications. Therefore, this study proposes a gas network aggregate modeling and identification method specifically for integrated energy system operation. Methods Taking the gas network as the research object, the concept of the gas network aggregate model is proposed, its formula is derived, and a corresponding offline parameter estimation method is designed. Since the derivation of the gas network aggregate model depends on specific operating conditions, the model parameters vary with condition changes, leading to non-negligible errors in the offline estimation model. To address this issue, a rolling calibration method based on forgetting factor recursive least squares is proposed. Results Under small gas flow variations, the offline parameter estimation method demonstrates satisfactory accuracy. However, under rapid flow variations, the offline estimation fails to accurately describe the operation status of the gas network, and rolling calibration can achieve accurate fitting of the model. Conclusions The proposed gas network aggregate model integrating offline estimation and online rolling calibration can provide a practical and efficient fluid network modeling solution for the operation analysis and control of integrated energy systems.

Key words: natural gas, integrated energy system, new energy consumption, gas network, aggregate model, parameter estimation, online calibration

CLC Number: