发电技术 ›› 2021, Vol. 42 ›› Issue (3): 363-373.DOI: 10.12096/j.2096-4528.pgt.19188
收稿日期:
2020-03-01
出版日期:
2021-06-30
发布日期:
2021-06-29
作者简介:
陈刚(1970), 男, 高级工程师, 主要研究方向为燃煤火电机组中制粉系统性能优化, 包括BBD双进双出钢球磨煤机、HP磨煤机、MPS磨煤机的出力提升和煤粉管道风粉调平, 1114170670@qq.com
Gang CHEN1(), Jinfeng LIU2, Dazheng LI1, Hua CHENG1
Received:
2020-03-01
Published:
2021-06-30
Online:
2021-06-29
摘要:
为了满足发电机组对制粉系统越来越高的要求,对制粉系统进行优化改造是十分必要的。通过对中速磨煤机和煤粉管道的详细分析和研究,找到症结所在并提出了磨煤机优化措施和煤粉管道动态调平方法。磨煤机优化研究引入磨内流场的理念,通过对磨内结构的改进,最终实现对磨内流场的整体优化,使中速磨煤机的性能得到全面本质性提升。管道动态调平是在实现风粉磨内均化的前提下,采用压差法实时对管道之间风粉流量偏差进行测量,根据测量结果,利用管道上的阻力调节装置,实时调平管道之间的阻力,实现管道之间一次风流量均衡控制,最终实现制粉系统风粉均衡控制。该技术能有效提高制粉系统对煤种适应能力,并实现风粉动态均衡控制。
中图分类号:
陈刚, 刘进峰, 李大正, 程华. 中速磨煤机制粉系统优化技术研究及应用[J]. 发电技术, 2021, 42(3): 363-373.
Gang CHEN, Jinfeng LIU, Dazheng LI, Hua CHENG. Research and Application of Optimization Technology of Medium Speed Pulverizing System[J]. Power Generation Technology, 2021, 42(3): 363-373.
煤粉管编号 | R90筛余/% | R90细度偏差/% | 抽取3 min总粉量/g | 煤粉质量偏差/g | 煤粉质量分数偏差/% |
F1 | 15.36 | -4.60 | 95.34 | -14.88 | -13.50 |
F2 | 37.24 | 17.28 | 166.04 | 55.82 | 50.64 |
F3 | 28.32 | 8.36 | 100.40 | -9.86 | -8.95 |
F4 | 19.64 | -0.32 | 120.10 | 9.83 | 8.92 |
F5 | 8.20 | -11.76 | 72.52 | -37.70 | -34.21 |
F6 | 11.00 | -8.96 | 107.00 | -3.20 | -2.90 |
平均值 | 19.96 | - | 110.72 | - | - |
表1 煤粉偏差统计表
Tab. 1 Statistical table of Pulverized coal
煤粉管编号 | R90筛余/% | R90细度偏差/% | 抽取3 min总粉量/g | 煤粉质量偏差/g | 煤粉质量分数偏差/% |
F1 | 15.36 | -4.60 | 95.34 | -14.88 | -13.50 |
F2 | 37.24 | 17.28 | 166.04 | 55.82 | 50.64 |
F3 | 28.32 | 8.36 | 100.40 | -9.86 | -8.95 |
F4 | 19.64 | -0.32 | 120.10 | 9.83 | 8.92 |
F5 | 8.20 | -11.76 | 72.52 | -37.70 | -34.21 |
F6 | 11.00 | -8.96 | 107.00 | -3.20 | -2.90 |
平均值 | 19.96 | - | 110.72 | - | - |
磨煤机形式 | HP | MPS(ZGM) |
磨辊加载方式 | 弹簧变加载 | 液压变加载 |
分离器形式 | 动态分离器 | 动、静结合分离器 |
磨辊形式 | 圆锥形辊 | 轮胎形辊 |
表2 HP磨煤机与MPS(ZGM)磨煤机结构比较
Tab. 2 Structural contrast between HP and MPS(ZGM) coal mills
磨煤机形式 | HP | MPS(ZGM) |
磨辊加载方式 | 弹簧变加载 | 液压变加载 |
分离器形式 | 动态分离器 | 动、静结合分离器 |
磨辊形式 | 圆锥形辊 | 轮胎形辊 |
参数 | 2F磨 | 2D磨 |
磨煤机电流/A | 55.30 | 54.64 |
一次风量/(t/h) | 110.90 | 96.99 |
进口一次风压力/kPa | 8.91 | 9.07 |
磨煤机出口压力/kPa | 4.40 | 2.57 |
磨煤机阻力/kPa | 4.51 | 6.51 |
给煤机煤量/(t/h) | 56.90 | 48.57 |
风煤比 | 2.05 | 2.00 |
磨煤机单位电耗/(kW·h/t) | 8.58 | 9.94 |
分离器电流/A | 41.83 | 0 |
分离器单位电耗/(kW·h/t) | 0.46 | 0 |
总单位电耗/(kW·h/t) | 9.04 | 9.94 |
煤粉细度R90(15~25) | 18 | 16 |
表3 ZGM113N磨煤机优化比较
Tab. 3 Optimization effect comparison of ZGM113N coal mill
参数 | 2F磨 | 2D磨 |
磨煤机电流/A | 55.30 | 54.64 |
一次风量/(t/h) | 110.90 | 96.99 |
进口一次风压力/kPa | 8.91 | 9.07 |
磨煤机出口压力/kPa | 4.40 | 2.57 |
磨煤机阻力/kPa | 4.51 | 6.51 |
给煤机煤量/(t/h) | 56.90 | 48.57 |
风煤比 | 2.05 | 2.00 |
磨煤机单位电耗/(kW·h/t) | 8.58 | 9.94 |
分离器电流/A | 41.83 | 0 |
分离器单位电耗/(kW·h/t) | 0.46 | 0 |
总单位电耗/(kW·h/t) | 9.04 | 9.94 |
煤粉细度R90(15~25) | 18 | 16 |
1 | 陆志厚. 1000MW机组带旋转分离器的HP1163/Dyn型碗式中速磨煤机的结构设计特征浅析[J]. 电站辅机, 2006, 27 (1): 20- 27. |
LU Z H . The features of construction design of HP 1163/Dyn bowl type medium-speed pulverizer with rotary separater for 1000 MW power unit[J]. Power Station Auxiliary Equipment, 2006, 27 (1): 20- 27. | |
2 | 尤卫群, 吴运国, 吕春俊. MPS280中速磨煤机动静风环改造[J]. 电站辅机, 2011, 32 (4): 33- 38. |
YOU W Q , WU Y G , LÜ C J . Improvement on dynamic & static sealing rings in MPS280 medium-speed pulverizer[J]. Power Station Auxiliary Equipment, 2011, 32 (4): 33- 38. | |
3 | 龚九洲, 李涛, 郭庆, 等. 1000MW机组中速磨煤机风环改造分析[J]. 机械设计与制造, 2015, (2): 129- 131. |
GONG J Z , LI T , GUO Q , et al. Nozzle ring transformation of medium speed coal mill in 1000 MW generating unit[J]. Machinery Design & Manufacture, 2015, (2): 129- 131. | |
4 | 崔修强. 碗式中速磨煤机运行特性试验研究及应用[J]. 发电技术, 2019, 40 (2): 187- 191. |
CUI X Q . Experimental investigations and application of operational characteristics for bowl pulverizer[J]. Power Generation Technology, 2019, 40 (2): 187- 191. | |
5 | 方军庭. ZGM中速磨煤机风环改造后性能分析及改造效果评估[J]. 热能动力工程, 2019, 34 (2): 145- 149. |
FANG J T . Evaluation of retrofit effectiveness and performance analysis for Nozzle ring transformation of ZGM medium speed mill[J]. Journal of Engineering for Thermal Energy and Power, 2019, 34 (2): 145- 149. | |
6 | 王羽, 韦红旗, 沈萌萌. 火电厂中速磨煤机一次风道流场优化[J]. 发电设备, 2020, 34 (1): 14- 19. |
WANG Y , WEI H Q , SHEN M M . Flow field optimization of a primary air duct for the medium-speed coal mill of thermal power plant[J]. Power Equipment, 2020, 34 (1): 14- 19. | |
7 | 潘国清, 应明良, 蔡洁聪, 等. ZGM133G中速磨煤机调整试验研究[J]. 浙江电力, 2011, 30 (3): 31- 33. |
PAN G Q , YING M L , CAI J C , et al. Research on adjustment tests of ZGM133G medium-speed coal pulverizer[J]. Zhejiang Electric Power, 2011, 30 (3): 31- 33. | |
8 | 王一, 赵学峰, 远岩灵, 等. HP1003磨煤机磨辊装置的改进[J]. 浙江电力, 2012, 31 (9): 82- 84. |
WANG Y , ZHAO X F , YUAN Y L , et al. Transformation of grinding roll for HP1003 coal mill[J]. Zhejiang Electric Power, 2012, 31 (9): 82- 84. | |
9 | 刘定坡, 杨培军, 冯广磊, 等. 直吹式制粉系统风粉偏差对机组灵活性的影响[J]. 洁净煤技术, 2019, 25 (2): 139- 143. |
LIU D P , YANG P J , FENG G L , et al. Influence of air-powder distribution deviation of direct-blowing pulverizing system on unit operation flexibility[J]. Clean Coal Technology, 2019, 25 (2): 139- 143. | |
10 | 张振亚, 赵玉杰. 浅析中速磨煤机动态分离器技术在实际运行中的应用[C]//全国火电300MW级机组能效对标级竞赛第四十二届年会. 北京, 2013. |
ZHANG Z Y, ZHAO Y J. The application of dynamic separator technology in practical operation of medium speed coal mill is briefly discussed[C]//The 42nd Annual Meeting of Energy Efficiency Benchmarking Competition of 300 MW Thermal Power Unit. Beijing, 2013. | |
11 | 中华人民共和国工业和信息化部. HP碗式磨煤机: JB/T 7680-2017[S]. 北京: 机械工业出版社, 2017. |
Ministry of Industry and Information Technology of the People's Republic of China. HP bowl type coal mill: JB/T 7680-2017[S]. Beijing: China Machine Press, 2017. | |
12 | 北京电力设备总厂. ZGM型中速辊式磨煤机技术条件与选型导则: Q/DL01. J101-2009[S]. 北京: 北京电力设备总厂, 2009. |
Beijing Electric Power Equipment General Plant. ZGM type medium speed roller type coal mill technical conditions and selection guide: Q/DL01. J101- 2009[S]. Beijing: Beijing Electric Power Equipment General Plant, 2009. | |
13 | 国家能源局. 电站磨煤机及制粉系统选型导则: DL/T 466-2017[S]. 北京: 中国电力出版社, 2017. |
National Energy Administration. Selection guidelines for power station coal mill and pulverizing system: DL/T 466-2017[S]. Beijing: China Electric Power Press, 2017. | |
14 | 陈刚, 李大正, 何锋发, 等. 高效中速磨:ZL 201510016050.3[P]. 2015-01-13. |
CHEN G, LI D Z, HE F F, et al. High efficiency medium speed mill: ZL 201510016050.3[P]. 2015-01-13. | |
15 | 陈刚, 李大正, 何锋发, 等. 一种中速磨流场优化方法:ZL 201510016046.7[P]. 2015-01-13. |
CHEN G, LI D Z, HE F F, et al. An optimization method of medium speed mill flow field: ZL 201510016046.7[P]. 2015-01-13. | |
16 | 上海意丰机电科技开发有限公司. YF-WH型高效动态分离器: Q31/0112000729C004-2018[S]. 上海: 上海意丰机电科技开发有限公司, 2018. |
Shanghai Yifeng Electromechanical Technology Development Co., Ltd. . YF-WH type efficient dynamic separator: Q31/0112000729C004-2018[S]. Shanghai: Shanghai Yifeng Electromechanical Technology Development Co., Ltd., 2018. | |
17 | 上海意丰机电科技开发有限公司. YF-W型高效中速磨: Q31/0112000729C001-2018[S]. 上海: 上海意丰机电科技开发有限公司, 2018. |
Shanghai Yifeng Electromechanical Technology Development Co., Ltd. . YF-W type high efficiency medium speed mill: Q31/0112000729C001-2018[S]. Shanghai: Shanghai Yifeng Electromechanical Technology Development Co., Ltd., 2018. | |
18 | 李大正, 陈刚, 何锋发, 等. 一种高效动态分离器:ZL 201420063511.3[P]. 2014-10-15. |
LI D Z, CHEN G, HE F F, et al. The utility model relates to an efficient dynamic separator: ZL 201420063511.3[P]. 2014-10-15. | |
19 | 何锋发, 陈刚, 李大正, 等. 一种动、静风环:ZL 201820155919.1[P]. 2018-01-30. |
HE F F, CHEN G, LI D Z, et al. A kind of dynamic and static wind rings: ZL 201820155919.1[P]. 2018-01-30. | |
20 | 陈刚, 李大正, 何锋发, 等. 一种风粉实时调平装置:ZL 201820906529.3[P]. 2018-06-12. |
CHEN G, LI D Z, HE F F, et al. The utility model relates to a real-time air powder leveling device: Z 201820906529.3[P]. 2018-06-12. | |
21 | 陈刚, 李大正, 程华, 等. 一种防堵测压装置:ZL 201821956176.4[P]. 2018-11-26. |
CHEN G, LI D Z, CHENG H, et al. The utility model relates to an anti-blocking pressure measuring device: ZL 201821956176.4[P]. 2018-11-26. |
[1] | 马海彦,周雷,王庭文,周静,谭厚章,金立梅. 1060 MW燃煤机组烟道流场性能诊断与优化[J]. 发电技术, 2018, 39(3): 253-258. |
[2] | 马龙信, 孙科, 贺军, 郑健. 动态分离器在某电厂机组改造中的应用分析[J]. 发电技术, 2017, 38(3): 40-42. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||